MIL-PRF-55359A(CR)
any visible degradation that can be attributed to flaky, pitted, blistered or otherwise loosened
finish.
3.10.8 Sand and dust (see 4.6.8). The unit(s) shall withstand exposure to sand and dust
particles as encountered in desert areas. It shall show no evidence of corrosion as evidenced by
any visible degradation of material and finish.
4. VERIFICATION
4.1 Classification of inspection. Inspection shall be classified as follows.
a. First Article inspection (see 4.2).
b. Conformance inspection (see 4.3).
4.2 First article inspection. The first article inspection shall be performed by the
contractor. It shall consist of the inspection specified for Group A, Group B, and Group C (see
Tables I, II and III respectively).
4.3 Conformance inspection. The contractor shall perform the inspection specified in
4.3.1 through 4.3.4. This does not relieve the contractor of his responsibility for performance of
any additional inspection which is necessary to control the conformance of the product and to
assure compliance with all specification requirements. The Government will review and evaluate
the contractor's inspection procedures and examine the contractor's inspection records. In
addition, the Government, at its discretion, may perform all or any part of the specified inspection,
to verify the contractor's compliance with specified requirements (see 6.7).
4.3.1 Group A Inspection. Each unit shall be inspected for conformance to the inspections
specified in Table I. Discrete lots shall be formed from units that pass this inspection. Factors of
lot composition not defined herein, or in the contract or purchase order, shall be in accordance
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business